SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-007
B-60
Storage Subsystem Error Messages
01059
Cause. You requested changes to mirror-related configuration attributes of a disk
volume that is in a started state. This warning message is issued to inform you of the
effect of the command.
Effect. You're asked whether to perform the mirror-related configuration change while
the disk volume is in a started state.
Recovery. Respond “Y” to the prompt requesting approval to do changes online. If
you do not want to change the mirror-related configuration attributes of the disk volume
online, respond “N” to the prompt. Then you can stop the disk and reissue the ALTER
DISK command.
01060
subsystem-name
is the name of the subsystem returning the error message.
errornum
is a number identifying the error.
error-detail
is text that provides more information about the cause of the error.
Cause. An error occurred when you tried to change the disk configuration.
Effect. The configuration change did not take place. The subsystem-name indicates
which subsystem encountered the error condition. The value in errnum identifies the
nature of the problem. The error-detail text indicates the processor or processors
that the error condition affected.
Recovery. To determine whether or not to retry the command, refer to the errnum
and error-detail fields.
For example, if the error-detail text indicates a configuration status of “invalid in
processor n,” the change you made caused the configuration information in
processor n to become invalid. Such a situation might cause the loss of fault
tolerance. For instance, the backup disk might have lost access to the mirror disk drive.
STORAGE W01059 This action will cause the mirror-related
configuration of the disk to change while the disk volume is
in a started state.
STORAGE E01060 Configuration change failed, subsystem-name
returned error: errnum, error detail: error-detail.