SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Converting D-Series PUP and COUP Commands to
SCF Commands
SCF Reference Manual for the Storage Subsystem—529937-007
C-4
PUP Commands and Equivalent SCF Commands
REFRESH CONTROL DISK,
REFRESH
Performs a refresh operation for a disk
when all paths have been stopped.
REDEFINEVIRTDISK ALTER DISK, TYPE
VIRTUAL
Changes any specified attributes for the
virtual disk.
REMOVE STOP DISK Performs an implicit remove. (An implicit
remove is also performed when the
system is shut down.)
RENAME ALTER DISK Replaces only the default or alternate
name of the volume (VOLNAME or
ALTNAME options). If you use the
ALTER DISK, LABEL command to
change both names, all files on the
volume are deleted.
RENAME,
PERMANENT
RENAME DISK Replaces both the default and alternate
name of the volume.
REPLACEBOOT CONTROL DISK,
REPLACEBOOT
Replaces the bootstrap program on the
specified disk.
REVIVE START DISK Performs an implicit revive, if needed, to
update one half of a mirrored volume.
SECTOR INFO DISK, SECTOR Specifies the logical sector address (LSA)
for the operation. This can be a decimal,
octal (%), or hexadecimal (%H) number.
SETCACHE ALTER DISK, CACHE Changes any specified attribute for the
disk cache.
SHOWPOOL INFO POOL Displays information about the storage
pool.
SHOWVIRTDISK INFO DISK Displays information about the virtual
disk.
SPARE CONTROL DISK,
SPARE
Spares a defective sector of a disk.
STATUS STATUS Displays the current status of the object
type specified.
STOP DEVICE RESET
STOPOPENS STOPOPENS DISK Prevents files from being opened on a
disk. It does not disrupt any current
activity on the disk.
STOP PROCESS RESET
UP START Starts the object or process if it is in a
STOPPED state, making it available to
user processes. START DISK is also
used to revive one half of a mirrored
volume that is in a STOPPED state,
substate DOWN.
PUP Command SCF Command Comments (continued)