SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Index
SCF Reference Manual for the Storage Subsystem—529937-007
Index-7
F
EXTENTTHRESHOLD attribute
ADD POOL command 14-31
ALTER POOL command 14-74
External disk
can’t be automatically configured 6-6
F
Fabric
assignment based on slot number
shown in STATUS ADAPTER
display 11-10
shown in STATUS DISK
display 5-8
used in load balancing 8-1
used when adding adapter 11-20
failure, restarting after 7-11
Fault tolerance, configuring disks for 6-12
FCS Manager 1-2
FCS monitor process 1-2
Fibre Channel tape connections 13-2
File control blocks handled by CONTROL
DISK, REFRESH command 14-95
FIRMWARE attribute, REPLACE SAC
command 14-125
FLASHBOOT attribute, REPLACE
ADAPTER command 14-124
FLASHFIRMWARE attribute, REPLACE
ADAPTER command 14-124
FORCED attribute
ABORT DISK command 7-10, 14-5
ADD DISK command 14-13
ALTER DISK command 14-57
CONTROL DISK command 14-96
PRIMARY DISK command 14-117
on RVUs before G06.11 8-14
RESET DISK command 14-126
STOP DISK command 14-148
SWITCH ADAPTER command 14-155
FORMAT command, PUP C-3
Free space table, rebuilt by CONTROL,
REBUILDDFS command 7-17
FROMWARE attribute, REPLACE
ADAPTER command 14-124
FSTCACHING attribute
ADD DISK command for magnetic
disks 14-13
ADD PROFILE command 14-35
ALTER DISK command for magnetic
disks 6-22, 14-57
ALTER PROFILE command 14-78
FULLCHECKPOINTS attribute
ADD DISK command for magnetic
disks 14-13
ADD PROFILE command 14-36
ALTER DISK command for magnetic
disks 14-57
ALTER PROFILE command 14-78
G
Group numbers for S-series enclosures 2-9
H
HALTONERROR attribute
ADD DISK command for magnetic
disks 14-14
ADD PROFILE command 14-36
ALTER DISK command for magnetic
disks 6-22, 14-57
ALTER PROFILE command 14-79
HARDDOWN substate
defined 2-5
resetting 7-11
STATUS command display 7-11
HIGHPIN attribute
ADD DISK command
for magnetic disks 14-15
for virtual disks 14-25
ADD MON command 14-28
ADD POOL command 14-31
ADD PROFILE command 14-37
ADD SCSI command 14-43