SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Index
SCF Reference Manual for the Storage Subsystem—529937-007
Index-9
L
LABELTAPE attribute, ALTER SUBSYS
command 14-89
enables or disables labeled-tape
processing 13-13
ldev number 1-5
displayed by STATUS command 4-3,
5-21, 9-5, 10-6, 12-7, 13-6
LED attribute, CONTROL SAC
command 14-98
LIKE attribute
ADD command
compared to OBEYFORM attribute
of INFO command 1-4
ADD DISK command 14-8
ADD POOL command 14-29
ADD PROFILE command 14-33
ADD SCSI command 14-42
ADD TAPE command 14-45
ALTER DISK command 14-51
ALTER POOL command 14-72
ALTER SCSI command 14-84
ALTER TAPE command 14-90
to add a magnetic disk 6-20
to add a storage pool 9-6
to add a tape drive 13-9
to add a virtual disk 10-8
to add an Open SCSI device 12-8
LISTBAD command, PUP C-3
LISTCACHE command, PUP C-3
LISTCACHE, INIT command, PUP C-3
LISTCACHE, STATISTICS command,
PUP C-3
LISTDEV command 1-5
LISTDEV command, PUP C-3
LISTFREE command, PUP C-3
LISTLABEL command, PUP C-3
LISTLOG command, PUP C-3
LKIDLONGPOOLLEN attribute
ADD DISK command for magnetic
disks 14-15
ADD PROFILE command 14-37
ALTER DISK command for magnetic
disks 6-22, 14-59
ALTER PROFILE command 14-80
LKTABLESPACELEN attribute
ADD DISK command for magnetic
disks 14-15
ADD PROFILE command 14-37
ALTER DISK command for magnetic
disks 6-22, 14-59
ALTER PROFILE command 14-80
Load balancing
between fabrics 8-1
between processors, G06.10 and
earlier 8-6/8-18
between processors, G06.10 and
later 8-2/8-6
LOADMICROCODE command, PUP C-3
LOCATION attribute
ADD TAPE command 14-47
ALTER TAPE command 14-91
LOCATION attribute, STATUS SAC
command 14-144
Location-independent naming of virtual
disks 10-2
Lock key space set by
LKIDLONGPOOLLEN attribute
of ADD DISK command for magnetic
disks 14-15
of ADD PROFILE command 14-37
of ALTER DISK command for magnetic
disks 14-59
of ALTER PROFILE command 14-80
LOG attribute, INFO DISK
command 14-106
displays spared sectors 5-20
Logical device number
See ldev number