SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Index
SCF Reference Manual for the Storage Subsystem—529937-007
Index-12
N
MON object 2-7
See also SMF master process
ADD command for 14-27
ALTER command for 14-70
DELETE command for 14-101
INFO command for 14-107
PRIMARY command for 14-117
RESET command for 14-127
START command for 14-132
states and substates 2-7
STATUS command for 14-141
STOP command for 14-149
N
NAMEMASK attribute
ADD PROFILE command 14-38
ALTER PROFILE command 14-81
NAMES command 14-113/14-115
Naming conventions
for automatically configured
disks 14-38, 14-81
for Open SCSI devices 12-8
Naming, location-independent 10-2
NONAUDITEDINSERT attribute
ADD DISK command for magnetic
disks 14-18
ADD PROFILE command 14-39
ALTER DISK command for magnetic
disks 6-22
, 14-62
ALTER PROFILE command 14-81
Noninteractive mode, commands in 14-3
Nonmirrored disks
changing a mirrored volume into 6-14
changing into a mirrored volume 6-14
Nonsensitive SCF commands 14-4
NUMDISKPROCESSES attribute
ADD DISK command for magnetic
disks 14-18
ADD PROFILE command 14-39
NUMDISKPROCESSES
attribute (continued)
ALTER DISK command for magnetic
disks 6-22, 14-62
ALTER PROFILE command 14-81
NUMIO attribute
ADD SCSI command 14-43
ALTER SCSI command 14-85
O
OBEYFORM attribute
INFO command, compared to LIKE
attribute of ADD command 1-4
INFO DISK command 14-106
INFO MON command 14-107
INFO POOL command 14-108
INFO PROFILE command 14-109
INFO SCSI command 14-110
INFO TAPE command 14-111
to add a magnetic disk 6-20
to add a profile 6-9
to add a storage pool 9-7
to add a tape drive 13-10
to add a virtual disk 10-8
to add an Open SCSI device 12-8
to add SMF master process 4-4
to create command file 1-3
Object name template 2-1
Object names 2-1
wild-card characters in 2-1
Object states and substates
See States and substates, SCF
Object types 2-3
ADAPTER 2-3
DISK 2-4
MON 2-7
POOL 2-8
PROFILE 2-8
SCSI 2-10