SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Index
SCF Reference Manual for the Storage Subsystem—529937-007
Index-21
T
Swapping processors (continued)
for SMF master process 4-8
for virtual disk 10-13
SWITCH ADAPTER command 11-23,
14-155/14-156
SWITCH command 14-155/14-157
SWITCH DISK command 14-156
changes active data path for disk 7-27
considerations for 7-27
SWITCH SCSI command 14-157
changes the active data path for an
Open SCSI device 12-11
System configuration database 1-2
System disk
alternate location 6-5
considerations for 6-5
do not use STOPOPENS command
on 7-22, 14-153
T
TAOE attribute
ALTER TAPE command 14-90
Tape drive
See also TAPE object
adding 13-9
altering 13-11
configuration information for 13-3/13-5
configuring and managing 13-1/13-15
deleting 13-12
enabling or disabling labeled-tape
processing 13-13
starting 13-14
status information for 13-5/13-8
stopping 13-15
TAPE object 2-11
ADD command for 14-45
ALTER command for 14-89
DELETE command for 14-103
INFO command for 14-111
object name 2-11
TAPE object (continued)
PRIMARY command for 14-120
RESET command for 14-129
START command for 14-134
states and substates 2-11
STATUS command for 14-146
STOP command for 14-151
See also Tape drive 2-11
Tape path configuration 13-2
TEST substate, defined 2-5
Timeouts for commands 14-3
Topology branch
defined 8-1
G06.10 and earlier example 8-6
G06.11 and later example 8-3
support for enclosure interleaving 6-12
TRACEBUFLEN attribute
ADD SCSI command 14-44
ALTER SCSI command 14-87
TRACELEVEL attribute
ADD SCSI command 14-45
ALTER SCSI command 14-87
Troubleshooting
adapter installation 11-22
SCF states and substates 2-6
virtual disk, adding 10-9
TYPE attribute
ADD DISK command for magnetic
disks 14-23
ADD DISK command for virtual
disks 14-26
U
UNKNOWN-REASON substate,
defined 2-6
UP command, PUP C-4
UPDATESTATS attribute
ADD POOL command 14-32
ALTER POOL command 14-75