SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Displaying Information About Magnetic Disks
SCF Reference Manual for the Storage Subsystem—529937-007
5-19
Displaying Bad Sector Information
This display is an example of a disk that has no bad sectors.
-> INFO $SYSTEM, BAD
This display indicates that a disk that has a bad sector, as recorded in the Spare
Tracks Table.
-> INFO $DATA01, BAD
To spare the bad sector, see Sparing a Defective Sector on page 7-14.
Bad Sectors Information $SYSTEM Primary:
No bad sectors found.
Bad Sectors Information $SYSTEM Mirror:
No bad sectors found.
STORAGE - Bad Sector Information Magnetic DISK \GANESAN.$DATA01
Bad Sectors Information $DATA01 Primary:
No bad sectors found.
Bad Sectors Information $DATA01 Mirror:
Logical Sector Address Date Detected
%H0000795C SEPTEMBER 22, 2000 15:25:12
File Name File Address Logical Sector
Address
\GANESAN.$DATA01.DLSYS42X.OSIMAGE 573440-573951 %H0000795C
Explanation of Fields
Logical Sector
Address
a list of logical addresses of all bad sectors. The address is an
8-digit hexadecimal number. A logical sector contains 512 bytes.
Date Detected the date and time the bad sector was detected.
File Name the file name of the file (if any) that is stored in the bad sector.
File Address specifies that portion of the file that lies in the bad sector. This
value is the number of bytes (in decimal) from the beginning of
the file to the start of the bad logical sector and from the
beginning of the file to the end of the bad logical sector.