SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Disk Load Balancing
SCF Reference Manual for the Storage Subsystem—529937-008
8-16
Establishing a Disk Load Balance in RVUs Prior to
G06.11
9. Display the changed status:
-> STATUS $D02*-*
10. Move the corresponding disk processes to the other processor to match the
switched paths. This PRIMARY command forces half the disk processes to run in
processor 3:
-> PRIMARY ($D0203, $D0207, $D0208), 3
STORAGE - Status DISK \WAGER.$D0201-*
LDev Path Status State Substate Primary Backup
PID PID
104 PRIMARY ACTIVE STARTED 2,107 3,35
104 BACKUP INACTIVE STARTED 2,107 3,35
104 MIRROR ACTIVE STARTED 2,107 3,35
104 MIRROR-BACKUP INACTIVE STARTED 2,107 3,35
STORAGE - Status DISK \WAGER.$D0203-*
LDev Path Status State Substate Primary Backup
PID PID
105 PRIMARY INACTIVE STARTED 2,22 3,16
105 BACKUP ACTIVE STARTED 2,22 3,16
105 MIRROR INACTIVE STARTED 2,22 3,16
105 MIRROR-BACKUP ACTIVE STARTED 2,22 3,16
STORAGE - Status DISK \WAGER.$D0205-*
LDev Path Status State Substate Primary Backup
PID PID
105 PRIMARY ACTIVE STARTED 2,112 3,45
105 BACKUP INACTIVE STARTED 2,112 3,45
105 MIRROR ACTIVE STARTED 2,112 3,45
105 MIRROR-BACKUP INACTIVE STARTED 2,112 3,45
STORAGE - Status DISK \WAGER.$D0207-*
LDev Path Status State Substate Primary Backup
PID PID
112 PRIMARY INACTIVE STARTED 2,118 3,237
112 BACKUP ACTIVE STARTED 2,118 3,237
STORAGE - Status DISK \WAGER.$D0208-*
LDev Path Status State Substate Primary Backup
PID PID
114 PRIMARY INACTIVE STARTED 2,122 3,86
114 BACKUP ACTIVE STARTED 2,122 3,86