SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Configuring and Managing Storage Pools for
Magnetic Disks
SCF Reference Manual for the Storage Subsystem—529937-008
9-3
Displaying Storage Pool Configuration Information
Example of a Detailed INFO POOL Report
-> INFO POOL $POOL3, DETAIL
Many fields of the INFO POOL display different values if the SMF master process is
not started (Configuration State is SMF Master Process is Down).
STORAGE - Detailed Info POOL \COMM.$POOL3
*Audited............................... ALLOWED
*BackupCPU............................. 7
CatalogLocation....................... $VIRCFG.POOL3CAT
*DiskInterval.......................... 2%
*DiskThreshold......................... 90%
*ExtentInterval........................-1
*ExtentThreshold.......................-1
*HighPIN............................... OFF
*Magnetic.............................. REQUIRED
*Mirrored.............................. REQUIRED
*Mode.................................. QUIET
Monitor............................... $ZSMS
*PrimaryCPU............................ 6
*Program............................... $SYSTEM.SYSTEM.OPP
*StartState............................ STARTED
*UpdateStats........................... 1
Configuration State................... Fully Defined
Physical Volumes:
$P3D03 $P3D02 $P3D01
Virtual Volumes:
$NSDOM1 $NODE $NMS $NE $MYSTIC $MOSS $MINE $MHSRL2 $MHSREL
$MEZRPT $LOGICJ $LOGICI $LOGICG $LOGICF $LOGICD $LOGICB $LOGICA $LIME
$LANX $LANO $LANN $LANM $LANL $LANF $LAND $ASAP $FOXGT
Explanation of Fields
*
indicates an attribute whose value you can change by using the
ALTER POOL command.
Audited
shows whether audited volumes (protected by the TMF product)
are allowed or required in the storage pool.
BackupCPU
the backup processor in which the storage pool process should
start its backup process.
CatalogLocation
the location of the catalog for the storage pool process.
DiskInterval
the interval percentage at which the disk processes associated
with the physical volumes in the storage pool process should
generate additional disk-full EMS messages.
DiskThreshold
the threshold percentage of disk space usage at which the disk
processes associated with the physical volume in the storage
pool should generate an EMS warning message.
ExtentInterval
the extent interval at which the disk processes associated with
the physical volumes in the storage pool should generate
additional file-extent usage EMS messages.