SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Configuring and Managing Storage Pools for
Magnetic Disks
SCF Reference Manual for the Storage Subsystem—529937-008
9-11
Deleting a Storage Pool
Example
1. Identify the physical and virtual volumes associated with the pool:
-> INFO $POOL5, DETAIL
2. Delete the virtual disks associated with $POOL5:
-> DELETE DISK $*, SUB VIRTUAL, POOL $POOL5
3. Put the physical volumes associated with $POOL5 into the STOPPED state:
-> STOP ($P5D04, $P5D03, $P5D02, $P5D01 )
4. Remove the physical volumes from the storage pool:
-> ALTER $P5D04, POOL EXCLUDE
-> ALTER $P5D03, POOL EXCLUDE
-> ALTER $P5D02, POOL EXCLUDE
-> ALTER $P5D01, POOL EXCLUDE
5. Stop the storage pool:
-> STOP $POOL5
The storage pool enters the STOPPED state.
6. Delete the storage pool:
-> DELETE $POOL5
7. Verify the storage pool process has been removed from the system configuration
database:
-> INFO $POOL5
STORAGE - Detailed Info POOL \COMM.$POOL5
*Audited............................... ALLOWED
*BackupCPU............................. 9
CatalogLocation....................... $VIRCFG.POOL5CAT
*DiskInterval.......................... 2%
*DiskThreshold......................... 90%
*ExtentInterval........................-1
*ExtentThreshold.......................-1
*HighPIN............................... OFF
*Magnetic.............................. REQUIRED
*Mirrored.............................. REQUIRED
*Mode.................................. QUIET
Monitor............................... $ZSMS
*PrimaryCPU............................ 8
*Program............................... $SYSTEM.SYSTEM.OPP
*StartState............................ STARTED
*UpdateStats........................... 1
Configuration State................... Fully Defined
Physical Volumes:
$P5D04 $P5D03 $P5D02 $P5D01
Virtual Volumes:
$VDISK01 $VDISK02 $VDISK03 $VDISK04 $VDISK05 $VDISK06 $VDISK07 $VDISK08 $VDISK09
$VDISK11 $VDISK12 $VDISK13 $VDISK14 $VDISK15 $VDISK16 $VDISK17 $VDISK18 $VDISK19