SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Configuring and Managing Storage Pools for
Magnetic Disks
SCF Reference Manual for the Storage Subsystem—529937-008
9-12
Managing a Storage Pool
Managing a Storage Pool
Management tasks for storage pools include:
•
Starting a Storage Pool on page 9-12
•
Stopping a Storage Pool on page 9-13
•
Resetting a Storage Pool on page 9-13
•
Swapping Processors for a Pool Process on page 9-13
Starting a Storage Pool
The START POOL Command (page 14-111) puts the storage pool into the STARTED
state.
Considerations for START POOL
•
The storage pool process name must have a configuration record and a definition
with the SMF master process (as displayed by the INFO or STATUS commands).
•
TMF must be running on the system.
•
These objects must be started:
°
The SMF master process ($ZSMS).
°
The CATALOGLOCATION volume for the MON process (must also be enabled
by TMF).
°
The CATALOGLOCATION volume of the storage pool process (must also be
enabled by TMF).
•
To take a storage pool process out of the SERVICING state, reset it and start it
again.
Example
1. Start the storage pool process:
-> START $POOL00
2. Check the status of the process:
-> STATUS $POOL00