SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

SCF Reference Manual for the Storage Subsystem—529937-008
14-1
14
Storage Subsystem Commands
This section provides the syntax and description of SCF commands.
Overview of Storage Subsystem Commands
Table 14-1. Overview of Storage Subsystem Commands
Command Page Description
ABORT 14-5
Terminates the operation of an object without regard to the
current state of its operation.
ADD 14-8
Defines an object to the subsystem.
ALLOWOPENS 14-46
Allows an object to once again accept opens; reverses the
effect of the STOPOPENS command.
ALTER 14-48
Changes the values of one or more attributes of an object.
CONTROL 14-69
Allows you to:
Calculate a checksum
Power a disk on or off
Rebuild the free-space table
Refresh cache pages
Replace the bootstrap program
Manually spare a sector
DELETE 14-75
Removes an object from the subsystem.
INFO 14-80
Displays the configured attributes of an object.
INITIALIZE 14-88
Prepares a magnetic disk for use.
NAMES 14-89
Displays the names described by an object-name template.
PRIMARY 14-92
Causes the backup processor to become the primary
processor and the primary processor to become the backup
processor.
PROBE 14-98
Tests the Fibre Channel connection to a SAC on an FCSA.
RENAME 14-100
Changes the name of an object.
REPLACE 14-101
Downloads new firmware to adapters and SACs.
RESET 14-104
Moves an object to a state from which it can be started.
START 14-109
Initiates the operation of an object previously defined to a
subsystem.
STATS 14-114
Displays the accumulated statistics for an object and
optionally resets them.
STATUS 14-118
Displays the status of an object.
STOP 14-130
Terminates the operation of an object in an orderly manner.