SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-6
ABORT MON Command
SUB { ALL | MAGNETIC | VIRTUAL }
specifies that the command affects only disks of the specified type. The default is
ALL.
ABORT DISK Examples
•
To immediately stop the mirror path of $DATA00:
-> ABORT $DATA00-M
•
To immediately stop the mirror paths of $DATA00 and $DATA01, even if files are
open or if all other paths to the disk are down:
-> ABORT ($DATA00-M, $DATA01-M), FORCED
See Stopping a Magnetic Disk With the ABORT DISK Command on page 7-10.
ABORT MON Command
The ABORT MON command stops access to the SMF master process (same as the
STOP MON Command on page 14-131). The syntax is:
Wild-card characters are supported.
OUT file-spec
directs all SCF output to the specified file.
MON $ZSMS
is the SMF master process.
ABORT MON Consideration
Use the RESET Command on page 14-104 to prepare the process for restarting.
ABORT MON Example
-> ABORT MON $ZSMS
ABORT POOL Command
The ABORT POOL command makes a storage pool inaccessible to user requests
(same as the STOP POOL Command on page 14-132). The syntax is:
Wild-card characters are supported.
ABORT [ / OUT file-spec / ] MON $ZSMS
ABORT [ / OUT file-spec / ] POOL $pool