SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-9
ADD DISK Command
Magnetic Disk Attributes for the ADD Command
These attributes are valid for the ADD DISK command. For a description of these
attributes, see Disk Attribute Descriptions on page 14-12
[ , AUDITTRAILBUFFER number ]
[ , AUTOREVIVE { ON | OFF } ]
[ , AUTOSELECT { ON | OFF } ]
[ , AUTOSTART { ON | OFF } ]
[ , BACKUPCPU number ]
[ , BACKUPDEVICEID { number | ( shelf, bay ) }]
[ , BACKUPLOCATION {group,module,slot) ]
[ , BACKUPPORTNAME number ]
[ , BACKUPSAC { number | name } ]
[ , CBPOOLLEN number ]
[ , FORCED ]
[ , FSTCACHING { ON | OFF | ENABLED} ]
[ , FULLCHECKPOINTS { DISABLED | ENABLED | FORCED } ]
[ , HALTONERROR number ]
[ , HIGHPIN { ON | OFF } ]
[ , LKIDLONGPOOLLEN number ]
[ , LKTABLESPACELEN number ]
[ , MAXLOCKSPEROCB number ]
[ , MAXLOCKSPERTCB number ]
[ , MBACKUPDEVICEID { number | ( shelf, bay ) } ]
[ , MBACKUPLOCATION {group,module,slot) ]
[ , MBACKUPPORTNAME number ]
[ , MBACKUPSAC { number | name } ]
[ , MIRRORDEVICEID { number | ( shelf,bay ) } ]
[ , MIRRORLOCATION ( group,module,slot ) ]
[ , MIRRORLUN number ]
[ , MIRRORPORTNAME number ]
[ , MIRRORSAC { number | name } ]
[ , NONAUDITEDINSERT { ON | OFF } ]
[ , NUMDISKPROCESSES number ]
[ , OSSCACHING { ON | OFF } ]
[ , PHYSVOLSELECT { ON | OFF } ]
[ , POOL { $pool | EXCLUDE } ]
[ , PRIMARYCPU number ]
[ , PRIMARYDEVICEID { number | ( shelf,bay ) } ]
[ , PRIMARYLOCATION ( group,module,slot )
[ , PRIMARYLUN number }
[ , PRIMARYPORTNAME number ]
[ , PRIMARYSAC { number | name } ]
[ , PROGRAM [[$vol.]subvol.]fileid ]
[ , PROTECTDIRECTORY { CHECKPOINT | OFF | SERIAL } ]
[ , REVIVEBLOCKS number ]
[ , REVIVEINTERVAL number ]
[ , REVIVEPRIORITY number ]
[ , REVIVERATE number ]
[ , SERIALWRITES { ENABLED | DISABLED } ]
[ , SQLMXBUFFER number ]
[ , STARTSTATE { STARTED | STOPPED } ]
[ , TYPE { MAGNETIC | VIRTUAL } ]