SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Introduction to the Storage Subsystem
SCF Reference Manual for the Storage Subsystem—529937-008
1-5
Displaying Information About the Storage Subsystem
Displaying Information About the Storage
Subsystem
To display information about storage subsystem devices and processes, see:
•
The SCF INFO Command on page 14-80
•
LISTDEV Information for the Storage Subsystem on page 1-5
LISTDEV Information for the Storage Subsystem
You can use the SCF LISTDEV command to display configured information about
processes that have a device type and that are known to SCF.
For these storage subsystem devices, you can specify an existing ldev number in any
storage subsystem command (unless the command has a path specification):
•
The $ZZSTO storage subsystem manager
•
Disks (magnetic and virtual)
•
Tape drives
•
Open SCSI devices
•
Storage pools
•
The $ZSMS SMF manager
•
The $ZSLM or $ZSLM2 SCSI lock manager
These devices are assigned an LDEV number in the order in which they were
configured and as recorded in the destination control table.
Example
-> LISTDEV STORAGE
LDev Name PPID BPID Type RSize Pri Program
69 $ZZSTO 0,275 1,324 (65,0 ) 4096 180 \COMM.$SYSTEM.SYS01.TZSTO
6 $SYSTEM 0,257 1,257 ( 3,42) 4096 220 \COMM.$SYSTEM.SYS01.OSIMAGE
114 $ZIMBU 9,46 8,67 ( 3,36) 4096 219 \COMM.$SYSTEM.SYS01.OVDP
116 $ZERO 8,47 9,75 ( 3,36) 4096 219 \COMM.$SYSTEM.SYS01.OVDP
123 $WORK2 5,264 4,276 ( 3,43) 4096 220 \COMM.$SYSTEM.SYS01.TSYSDP2
…
138 $TAPE0 2,263 3,282 ( 4,9 ) 2048 200 \COMM.$SYSTEM.SYS01.OTPPROCP
…
316 $L700C16 1,282 0,286 ( 8,0 ) 4096 220 \COMM.$SYSTEM.SYS01.TDSCSI
…
201 $POOL6 9,19 8,22 (25,0 ) 4096 180 \COMM.$SYSTEM.SYS01.OPP
…
79 $ZSMS 5,30 4,39 (52,0 ) 4096 180 \COMM.$SYSTEM.SYS01.OMP
433 $ZSLM 0,281 1,266 (67,0 ) 1024 221 \COMM.$SYSTEM.SYS01.TZSLM