SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-23
Disk Attribute Descriptions
MIRRORSAC { number | name }
(mirrored 45xx and M8xxx disks only) is the SAC that controls the mirror path to
the disk.
MODE { NOISY | QUIET }
specifies whether to generate additional EMS messages for debugging.
NAMEMASK { STANDARD | name }
specifies a naming convention for automatically configuring disks.
Note. This attribute is not valid for the PROFILE object.
number Is the SAC subdevice number on the adapter.
name Is the full name of the SAC location including the SAC number. For
example:
SNDA.SAC-1.GRP-1.MOD-1.SLOT-53
FCSA.SAC-1.GRP-11.MOD-2.SLOT-5
Note. This attribute is only valid for virtual disks.
NOISY Generate additional EMS messages for debugging.
QUIET Generate only essential EMS messages (default).
Note. This attribute is only valid for the PROFILE object.
STANDARD The disk is named using the standard manufacturing naming
convention (default). The name format is $Dggss, where gg is
the group number and ss is the slot number. For example, a
disk inserted in group 31, slot 12 is named $D3112.
For M8xxx Fibre Channel disks, the standard name format is
$FCnn, where nn is supplied by the storage subsystem. nn
begins in the range 00 through 99 and continues with A0
through ZZ.
If MIRRORING is ON, the name is created when the first disk is
inserted, and the same name is used when the second disk
inserted for the mirrored volume.
name The disk is named using a nonstandard naming convention.
name can have up to 4 characters. The name format is
$namenn, where nn is supplied by the storage subsystem. nn
begins in the range 00 through 99 and continues with A0
through ZZ. For example, NAMEMASK DATA specifies the
naming convention $DATA00, $DATA01, and so on.