SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-38
ADD SCSI Command
[ , FSTCACHING { ON | OFF | ENABLED } ]
[ , FULLCHECKPOINTS { DISABLED | ENABLED | FORCED } ]
[ , HALTONERROR number ]
[ , HIGHPIN { ON | OFF } ]
[ , LKIDLONGPOOLLEN number ]
[ , LKTABLESPACELEN number ]
[ , MAXLOCKSPEROCB number ]
[ , MAXLOCKSPERTCB number ]
[ , MIRRORING { OFF | ON } ]
[ , NAMEMASK { STANDARD | name } ]
[ , NONAUDITEDINSERT { ON | OFF } ]
[ , NUMDISKPROCESSES number ]
[ , OSSCACHING { ON | OFF } ]
[ , PHYSVOLSELECT { ON | OFF } ]
[ , POOL { $pool | EXCLUDE } ]
[ , PROGRAM [[$vol.]subvol.]fileid ]
[ , PROTECTDIRECTORY { CHECKPOINT | OFF | SERIAL } ]
[ , REVIVEBLOCKS number ]
[ , REVIVEINTERVAL number ]
[ , REVIVEPRIORITY number ]
[ , REVIVERATE number ]
[ , SERIALWRITES { DISABLED | ENABLED } ]
[ , SQLMXBUFFER number ]
[ , STARTSTATE { STARTED | STOPPED } ]
ADD PROFILE Example
See the procedure for Creating a Custom Profile on page 6-9.
To make a custom profile for all new disks inserted into group 03:
-> ADD PROFILE $ZZSTO.INTERNAL-DISK-3, MIRRORING OFF
ADD SCSI Command
The ADD SCSI command adds an Open SCSI device to the system configuration.
Open SCSI devices also include Open SCSI Fibre Channel devices. The syntax is:
Wild-card characters are not supported.
OUT file-spec
directs all SCF output to the specified file.
SCSI $SCSI-device
is the name of the Open SCSI device.
ADD [ / OUT file-spec / ] SCSI $SCSI-device
, SENDTO STORAGE [ , LIKE object ]
[ , attribute-spec ]...