SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-49
ALTER DISK Command
•
Location attributes:
°
BACKUPLOCATION
°
MBACKUPLOCATION
°
MIRRORLOCATION
°
PRIMARYLOCATION
•
SAC attributes:
°
BACKUPSAC
°
MBACKUPSAC
°
MIRRORSAC
°
PRIMARYSAC
°
MIRRORLOCATION
•
PORTNAME attributes:
°
BACKUPPPORTNAME
°
MBACKUPPORTNAME
°
MIRRORPORTNAME
°
PRIMARYPORTNAME
•
LUN attributes:
°
MIRRORLUN
°
PRIMARYLUN
These virtual disk attributes are not copied from the LIKE object. To assign values
to these attributes, you must explicitly specify them:
•
ANTLOCATION
•
PENDOPSLOCATION
•
POOL
attribute-spec
is one or more Magnetic Disk Attributes for the ALTER DISK Command on
page 14-49 or Virtual Disk Attributes for the ALTER COMMAND on page 14-51.
Magnetic Disk Attributes for the ALTER DISK Command
These attributes are valid for the ALTER DISK command. For a description of these
attributes, see Disk Attribute Descriptions on page 14-12
[ , ALTNAME $vol ]
[ , AUDITTRAILBUFFER number ]
[ , AUTOREVIVE { ON | OFF } ]
[ , AUTOSELECT { ON | OFF } ]
[ , AUTOSTART { ON | OFF } ]
[ , BACKUPCPU number ]
[ , BACKUPDEVICEID { number | ( shelf, bay ) } ]
[ , BACKUPLOCATION {group,module,slot) ]
[ , BACKUPPORTNAME number ]
[ , BACKUPSAC { number | name } ]
[ , CACHE ( block-size, num-blocks ) |
( ( block-size, num-blocks ),
( block-size, num-blocks ),... )]
[ , CBPOOLLEN number ]