SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-58
ALTER PROFILE Command
ALTER PROFILE Command
The ALTER PROFILE command changes a disk configuration profile. The syntax is:
Wild-card characters are supported.
OUT file-spec
directs all SCF output to the specified file.
PROFILE $ZZSTO.INTERNAL-DISK[-groupnum ]
is either the standard default profile, $ZZSTO.#INTERNAL-DISK, or a user-created
custom profile for enclosure groupnum. groupnum cannot have a leading zero.
attribute-spec
is one or more PROFILE Attributes.
PROFILE Attributes
For a description of these attributes, see Disk Attribute Descriptions on page 14-12.
[ , AUDITTRAILBUFFER number ]
[ , AUTOLABEL { ON | OFF } ]
[ , AUTOREVIVE { ON | OFF } ]
[ , AUTOSELECT { ON | OFF } ]
[ , AUTOSTART { ON | OFF } ]
[ , CBPOOLLEN number ]
[ , FSTCACHING { ON | OFF | ENABLED } ]
[ , FULLCHECKPOINTS { DISABLED | ENABLED | FORCED } ]
[ , HALTONERROR number ]
[ , HIGHPIN { ON | OFF } ]
[ , LKIDLONGPOOLLEN number ]
[ , LKTABLESPACELEN number ]
[ , MAXLOCKSPEROCB number ]
[ , MAXLOCKSPERTCB number ]
[ , MIRRORING { OFF | ON } ]
[ , NAMEMASK { STANDARD | name } ]
[ , NONAUDITEDINSERT { ON | OFF } ]
[ , NUMDISKPROCESSES number ]
[ , OSSCACHING { ON | OFF } ]
[ , PHYSVOLSELECT { ON | OFF } ]
[ , POOL { $pool | EXCLUDE } ]
[ , PROGRAM [[$vol.]subvol.]fileid ]
[ , PROTECTDIRECTORY { CHECKPOINT | OFF | SERIAL } ]
[ , REVIVEBLOCKS number ]
[ , REVIVEINTERVAL number ]
ALTER [ / OUT file-spec / ]
PROFILE $ZZSTO.INTERNAL-DISK[-groupnum ]
[ , attribute-spec ]...