SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands

SCF Reference Manual for the Storage Subsystem—529937-008

14-63

ALTER SUBSYS Command

The ALTER SUBSYS command changes attributes of the storage subsystem manager.

The syntax is:

Wild card characters are not supported.

OUT file-spec

directs all SCF output to the specified file.

SUBSYS $ZZSTO

is the storage subsystem manager.

attribute-spec

is one or more ALTER SUBSYS Attributes.

ALTER SUBSYS Attributes

[ , AUTOCONFIGURE { ON | OFF } ]

[ , AUTOREVIVE { ON | OFF } ]

[ , AUTOSTART { ON | OFF } ]

[ , BULKIO { ON | OFF } ]

[ , LABELTAPE { ON | OFF } ]

[ , UPS { ON | OFF } ]

AUTOCONFIGURE { ON | OFF }

specifies whether the storage subsystem performs automatic configuration of

nonconfigured internal storage devices when they are discovered.

For information about using this attribute, see Automating Disk Configuration on

page 6-6.

AUTOREVIVE { ON | OFF }

(mirrored disks only) specifies whether to automatically start a revive operation on

a mirrored volume either when a new disk is inserted or when the system is loaded

and a mirrored volume is not synchronized.

ALTER [ / OUT file-spec / ] SUBSYS $ZZSTO

[ , attribute-spec ]...

ON Enables automatic configuration.

OFF Disables automatic configuration (default).

ON Automatically starts a revive operation using the values for the

REVIVEPRIORITY and REVIVERATE attributes.

OFF Does not automatically start a revive operation (default).