SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands

SCF Reference Manual for the Storage Subsystem—529937-008

14-116

STATS SAC Command

The STATS SAC command displays statistical information about the connections to a

SAC on an FCSA. The command can display information about a port in the Fibre

Channel link or the SAC itself

The syntax is:

Wild-card characters are supported.

If PORTNAME is not specified, statistics for the SAC are displayed.

OUT file-spec

directs all SCF output to the specified file.

#sac-name

is the name of the SAC in the form FCSA.SAC-sac.GRP-group.MOD-

module.SLOT-slot. For example:

#FCSA.SAC-2.GRP-110.MOD-2.SLOT-5

PORTNAME wwn

specifies the worldwide name of a port in the Fibre Channel link connected to the

SAC. wwn must be entered as a 16-character hexadecimal number without a

leading %H.

RESET [ , FORCED ]

restores statistics counters to their initial values. Only super-group users (255,nnn)

can use this attribute.

FORCED specifies that the command be executed without any interaction with the

user.

Note. The STATS SAC command is available on H06.04 and subsequent H-series RVUs.

STATS [ / OUT file-spec / ] SAC $ZZSTO.#sac-name

[ , PORTNAME wwn ]

[ , RESET [ , FORCED ] ]