SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-120
STATUS DISK Command
CONFIG
causes a display of the values that the running disk process is currently using as
operational parameters defined by certain disk configuration attributes. These
values can differ from the values entered into the system configuration database.
In the display, values that differ in this way are marked with an asterisk (*).
CONSISTENCY
verifies whether the path configuration stored in the system-configuration database
is identical to the path configuration used by the disk process pair and the two
SIFM processes.
DETAIL
displays detailed status information.
POOL $pool
specifies that the command is performed only on disks associated with the
specified storage pool.
SEL state
specifies that the command affects only devices in the specified state.
SUB { ALL | MAGNETIC | VIRTUAL }
specifies that the command affects only disks of the specified type. The default is
ALL.
STATUS DISK Examples For Magnetic Disks
•
To display the status of all magnetic disks available to the system:
-> STATUS DISK $*, SUB MAGNETIC
•
To display the status of all paths of all volumes on the system:
-> STATUS DISK $*-*
•
To display the status of a disk:
-> STATUS $SYSTEM
See the display and explanation under Example 1: Displaying the Status of a
Mirrored Disk on page 5-21.
•
To display the status of all paths to a disk:
-> STATUS DISK $SYSTEM-*
See the display and explanation under Example 2: Displaying the Status and State
of All Paths to a Disk on page 5-21.