SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-121
STATUS MON Command
•
To display the status of all paths to all internal disks in the group 02 topology
branch:
-> STATUS $D02*-*
The display is shown on page 8-17.
•
To display the consistency information about the disk volume $WENDY:
-> STATUS $WENDY, CONSISTENCY
See the display and explanation under Example 4: Displaying STATUS DISK,
CONSISTENCY Information on page 5-23.
STATUS DISK Examples For Virtual Disks
•
To display the status of a virtual disk:
-> STATUS $VDISK00
See the display and explanation under Example of a STATUS DISK Report for
Virtual Disks on page 10-6.
•
To display detailed status of a virtual disk:
-> STATUS $VDISK00, DETAIL
See the display and explanation under Example of a Detailed STATUS DISK
Report for Virtual Disks on page 10-6.
STATUS MON Command
The STATUS MON command displays current status information about the SMF
master process. The syntax is:
Wild-card characters are supported.
OUT file-spec
directs all SCF output to the specified file.
MON $ZSMS
is the SMF master process.
DETAIL
displays detailed status information.
STATUS [ / OUT file-spec / ] MON $ZSMS
[ , DETAIL ] [ , SEL state ]