SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-122
STATUS POOL Command
SEL state
specifies that the command affects only devices in the specified state.
STATUS MON Examples
•
To display the current status of the SMF master process:
-> STATUS $ZSMS
See the display and explanation under Example of a STATUS MON Command on
page 4-3.
•
To display detailed status of the SMF master process:
-> STATUS $ZSMS, DETAIL
See the display and explanation under Example of a Detailed STATUS MON
Report on page 4-3.
STATUS POOL Command
The STATUS POOL command displays current status information about the storage
pool process. The syntax is:
Wild-card characters are supported.
OUT file-spec
directs all SCF output to the specified file.
POOL $pool
is the storage pool process.
DETAIL
displays detailed status information.
SEL state
specifies that the command affects only devices in the specified state.
STATUS POOL Examples
•
To display the status of a storage pool process:
-> STATUS $POOL01
STATUS [ / OUT file-spec / ] POOL $pool
[ , DETAIL ] [ , SEL state ]