SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-123
STATUS SAC Command
See the display and explanation under Example of a STATUS POOL Report on
page 9-5.
•
To display detailed status of a storage pool process:
-> STATUS $POOL00, DETAIL
See the display and explanation under Example of a Detailed STATUS POOL
Report on page 9-5.
•
To display the status of all storage pool processes in the STOPPED state:
-> STATUS POOL $*, SEL STOPPED
STATUS SAC Command
The STATUS SAC command displays current status information about connections to
a SAC on an FCSA.
The command syntax is:
OUT file-spec
directs all SCF output to the specified file.
#sac-name
is the name of the SAC in the form #FCSA.SAC-sac.GRP-group.MOD-
module.SLOT-slot. For example:
#FCSA.SAC-2.GRP-110.MOD-2.SLOT-5
attribute-spec
is one of the STATUS SAC Attributes.
STATUS SAC Attributes
[ , EMU , DEVICEID (shelf, 0) ]
[ , EMULIST ]
[ , LOCATION , PORTNAME wwn ]
[ , LUNLIST , PORTNAME wwn [ , LUN number ] [ , DETAIL ] ]
[ , PATHSTATUS , DEVICEID (shelf, 0) ]
[ , PORTLIST [ , PORTNAME wwn ] [ , DETAIL ] ]
[ , REPLACE , DEVICEID (shelf, 99) ]
DETAIL
displays additional information when used with LUNLIST or PORTLIST.
STATUS [ /OUT file-spec / ] SAC $ZZSTO.#sac-name
[ , attribute-spec ]