SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-008
14-124
STATUS SAC Command
EMU , DEVICEID (shelf , 0)
displays a small subset of the inventory and status information from the
environmental monitoring unit (EMU).
shelf specifies the shelf number of the enclosure to which the command applies.
The bay number must be 0.
EMULIST
displays the shelf worldwide names for any EMUs visible through the SAC.
LOCATION
displays the shelf and bay of the disk with the specified PORTNAME.
LUN
specifies a Logical Unit Number (LUN) in the range 0-32767.
LUNLIST
displays the LUN numbers that are available through the specified PORTNAME. If
a LUN is specified, only that LUN is shown.
PATHSTATUS , DEVICEID (shelf , 0)
displays the status of the path to the EMU in the specified shelf. The bay number
must be 0.
PORTLIST
displays the port worldwide names that are visible through the SAC. If a
PORTNAME is specified, only that PORTNAME is shown.
PORTNAME wwn
specifies the worldwide name of a port entered as a 16-character hexadecimal
number without a leading %H.
REPLACE, DEVICEID (shelf , 99)
indicates whether a replace firmware operation is being performed for the specified
enclosure. The command displays a message if the $ZFCnn process is busy
updating firmware. Otherwise, the command produces no display.
shelf specifies the shelf number of the enclosure. The bay number must be 99.