SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages

SCF Reference Manual for the Storage Subsystem—529937-008

B-2

Handling File-System Error Messages

When you encounter file-system error messages that display a number, use one of

these methods to get a description of the error:

•

Use online help to display it. For example, to display help text associated with file-

system error 66:

-> error 66

•

Look up the error number in the Guardian Procedure Calls Reference Manual.

Storage Subsystem Error Messages

00001

Cause. You specified more than 30 object names in the command.

Effect. The command is not executed. SCF waits for the next command.

Recovery. Reissue the command with fewer than 31 object names specified.

00002

command

is the SCF command you issued to a disk or tape device.

nnnnn

is the file-system error number. To get more information about the error, see

Handling File-System Error Messages on page B-2.

Cause. The command was rejected by the I/O process.

Effect. The command is not executed. SCF waits for the next command.

Recovery. Check the returned file-system error to determine what to do next.

00003

STORAGE 00001 Too many object names present in the command.

Object names : list

STORAGE 00002 command rejected, file system error: nnnnn

STORAGE 00003 An empty response was received from the Storage

subsystem manager: $ZZSTO