SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-3
Storage Subsystem Error Messages
Cause. Response type ZSPI-VAL-ERR-AND-WARN was specified by the server but
the reply buffer contained no error nor warning.
Effect. SCF waits for the next command.
Recovery. Informational message only; no corrective action is required.
00004
tokname
is the name of the token issued with the command.
objname
is the object name you specified with the command.
Cause. The specified token conflicts with other tokens in the requester buffer.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
00005
objtype
is the object type you specified with the command.
objname
is the object name you specified with the command.
Cause. The object name you specified does not match the object type you specified.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the command object type or object name and reissue the
command.
00006
Cause. An invalid case value was generated with no associated case label.
STORAGE 00004 Token conflict in requester buffer, token:
tokname, object name: objname
STORAGE 00005 Object type and object name mismatched, object
type: objtype, object name: objname
STORAGE 00006 INTERNAL ERROR: Case value out of range.