SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-13
Storage Subsystem Error Messages
00031
Cause. The system configuration database is busy and therefore temporarily locked.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Wait a short while and reissue the command. If the problem persists,
contact your service provider. See If You Have to Contact Your Service Provider on
page B-1.
00032
objtype
is the object type of the object you specified with the command.
devname
is the name of the device you specified in the command.
Cause. The processors configured for the device are not functioning.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Reload one or more of the configured processors and reissue the
command.
00033
objtype
is the object type of the object you specified with the command.
devname
is the name of the device you specified in the command.
Cause. The device specified in a command was installed in the system, but it was not
configured.
Effect. The command is not executed. SCF waits for the next command.
STORAGE 00031 System configuration database
($SYSTEM.ZSYSCONF.CONFIG) is locked.
STORAGE 00032 None of the configured processors for objtype
devname are available
STORAGE 00033 objtype devname is not configured.