SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-15
Storage Subsystem Error Messages
processor
is the attribute you used in the command to specify the primary processor
(PRIMARYCPU) or backup processor (BACKUPCPU).
Cause. You specified an invalid processor number in the command. The specified
processor cannot access the adapters controlling the device.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Reissue the command with the correct processor number. The adapters
controlling the device must be accessible from the processors specified for both the
BACKUPCPU and PRIMARYCPU.
00037
command
is the command you specified.
Cause. You specified different group values in the PRIMARYLOCATION and
MIRRORLOCATION attributes.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Reissue the command using the same group value for both the
MIRRORLOCATION and PRIMARYLOCATION attributes.
00038
objtype
is the object type of the object you specified with the command.
devname
is the name of the device you specified in the command.
Cause. A designated processor for the device is not running.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Verify the processing environment for the device exists and retry the
command. For example, you should verify the processors are running and check the
EMS log for errors.
STORAGE 00037 command failed. Cannot find hardware in
specified parameter (location, primary location, mirror
location).
STORAGE 00038 objtype devname is not running.