SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-16
Storage Subsystem Error Messages
00039
Object
is the type of the device you specified in the command.
Cause. The device you specified in the command is already being used.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Reissue the command and specify the correct device.
00040
Cause. One or more configuration database records are missing. This can happen
when the indicated object (or parts of the object) is not configured.
Effect. The command is not executed. SCF waits for the next command.
Recovery. If possible, correct the configuration and reissue the command. If the
problem persists, contact your service provider. See If You Have to Contact Your
Service Provider on page B-1.
00041
Cause. The specified object probably has other objects dependent on its existence.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the attributes and reissue the command.
00042
Cause. The configuration database is locked by some other process.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Wait a few seconds and reissue the command.
STORAGE 00039 Object is already being used.
STORAGE 00040 Configuration database record not found.
STORAGE 00041 Configuration database record is in use.
STORAGE 00042 Configuration database access timeout.