SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-31
Storage Subsystem Error Messages
Recovery.
1. Refer to the error message for the cause of the error.
2. Retry the command.
3. If the problem persists, contact your service provider. See If You Have to Contact
Your Service Provider on page B-1.
00085
volname
is the disk name you specified.
err-num
is the file-system error that occurred. For more information, refer to the Guardian
Procedure Errors and Messages Manual.
Cause. A file-system error was returned from DSC_OLR_DEVICE_.
Effect. The command fails, possibly with the replace operation half finished.
Recovery.
1. Refer to the error message for the cause of the error.
2. Retry the command.
3. If the problem persists, contact your service provider. See If You Have to Contact
Your Service Provider on page B-1.
00086
volname
is the disk name you specified.
Cause. No replace operation has been done for this object.
Effect. The command is not executed. SCF waits for the next command.
Recovery. This is an informational message only. No recovery action is needed.
STORAGE 00085 REPLACE DISK volname Filesystem error returned
from DSC_OLR_DEVICE_, error: err-num.
STORAGE 00086 DISK volname does not have a software
replacement record.