SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-38
Storage Subsystem Error Messages
00106
Cause. You have specified two paths to a device through FCSA adapters in the same
IOAM module. This configuration is not recommended.
Effect. The command is not executed. SCF waits for the next command
Recovery. Specify the two paths in different IOAM modules.
00107
Cause. The requested device path configuration requires that Advanced Storage
Configuration be enabled in G-series versions of OSM . Advanced Storage
Configuration is required for device configuration options which became available in
T1083ABC (G06.23) including Enclosure Interleaving and Enterprise Storage (ESS)
disks.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Run the OSM Service Connection and select the action to Enable
Advanced Storage Configuration.
00108
Cause. Configuration of the device type is not allowed without a license file.
Effect. The request is not processed.
Recovery. Install the required license file. For Enterprise Storage disks, the required
license file is in the T0631 product.
00109
Cause. No FCSMON processes are running, or they have not yet been assigned to
monitor the specified SAC.
Effect. Can't access the fiber.
STORAGE E00106 The two paths to a device must be in different
IOAM modules
STORAGE E00107 The requested configuration requires that
Advanced Storage Configuration is enabled in OSM
STORAGE E00108 Cannot configure the specified device without
a license file.
STORAGE E00109 Can't access fiber because no FCSMON processes
are assigned.