SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Configuring and Managing the SMF Master Process
SCF Reference Manual for the Storage Subsystem—529937-008
4-3
Displaying Current Status Information
Displaying Current Status Information
The STATUS MON Command (page 14-121) displays status information about the
SMF master process.
Example of a STATUS MON Command
-> STATUS MON $ZSMS
Example of a Detailed STATUS MON Report
-> STATUS MON $ZSMS, DETAIL
CatalogLocation the location of the catalog for the SMF master process.
Highpin shows whether the IOP can run at a high PIN (ON) or a low PIN
(OFF). The PIN is the process identification number.
Mode shows whether the SMF master process generates additional
EMS messages.
PrimaryCPU the processor number of the primary SMF master process.
Program the object file name of the SMF master process.
STORAGE - Status MON \COMM.$ZSMS
LDev State Primary Backup Type Subtype
PID PID
79 STARTED 5,30 4,39 52 0
STORAGE - Detailed Status MON \COMM.$ZSMS
Mon Process Information:
LDev State Primary Backup Type Subtype
PID PID
79 STARTED 5,30 4,39 52 0
Mon I/O Process Information:
Library File.......
Program File....... $SYSTEM.SYS01.OMP
Explanation of Fields
LDev the logical device number for the SMF master process.
State the object state of the SMF master process.
Primary PID
Backup PID
the processor number and PIN of the current primary and backup
SMF master processes.
Type the device type. The SMF master process is always type 52.
Subtype the device subtype. The SMF master process is always subtype 0.