SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-40
Storage Subsystem Error Messages
Effect. The disk revive operation is started.
Recovery. Informational message only; no corrective action is required. SCF initializes
a disk revive operation.
01002
objtype
is the object type of the object you specified with the command.
devname
is the name of the device you specified in the command.
state
is the current state of the device you specified in the command.
Cause. The device is in a state from which it cannot be started.
Effect. The device is not started. SCF waits for the next command.
Recovery. Issue an SCF RESET command.
01003
command
is the SCF command that you issued.
Cause. The operation cannot be performed because a disk revive operation is still in
progress.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Verify the state of the device by using the SCF STATUS command. Either
wait until the revive operation is completed or if you need to temporarily stop the revive
operation, use the SCF RESET command to suspend the revive operation before
retrying the operation.
01004
STORAGE 01002 objtype devname is state. Please use RESET
command.
STORAGE 01003 command rejected, a disk revive is in progress.
STORAGE 01004 command rejected, disk contains active audit
trail files.