SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-43
Storage Subsystem Error Messages
volname
is the name of the volume that you specified in the command to alter cache.
Cause. You issued an ALTER DISK, CACHE command in noninteractive mode. In
interactive mode, you are prompted to verify the operation.
Effect. The cache counters are reset.
Recovery. Informational message only; no corrective action is required.
01010
volname
is the name of the volume that you specified in the command to rewrite the label.
Cause. You issued the ALTER DISK, LABEL command in noninteractive mode. The
ALTER DISK, LABEL command is available only in interactive mode. In interactive
mode, you are prompted to verify the operation.
Effect. The label operation is not performed. SCF waits for the next command.
Recovery.
1. Start SCF and reissue the command from the SCF prompt.
2. Remove the command from the SCF command file.
01011
command
is the SCF command that you issued.
volname
is the name of the volume that you specified in the command.
Cause. You issued the CONTROL DISK, CHECKSUM command in noninteractive
mode. The CONTROL DISK, CHECKSUM command is available only in interactive
mode. In interactive mode, you are prompted to verify the operation.
Effect. The checksum operation is not performed. SCF waits for the next command.
Recovery.
1. Start SCF and reissue the command from the SCF prompt.
STORAGE 01010 The ALTER DISK, LABEL command will DESTROY any
existing files on volname.
STORAGE 01011 The command operation could leave data in an
INCONSISTENT state on volname.