SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-45
Storage Subsystem Error Messages
Cause. You issued the CONTROL DISK, SPARE command to spare a disk sector.
The disk controller has verified that the sector does not need to be spared.
Effect. The disk sector is not spared. SCF waits for the next command.
Recovery.
1. Verify you used the correct sector address.
2. Reissue the command with the correct address, if needed.
01015
volname
is the name of the volume that you have specified a statistical reset for.
Cause. You issued the STATS DISK, RESET command in noninteractive mode. The
STATS DISK, RESET command is available only in interactive mode. In interactive
mode, you are prompted to verify the operation.
Effect. The statistics counters are not reset. SCF waits for the next command.
Recovery.
1. Start SCF and reissue the command from the SCF prompt.
2. Remove the command from the SCF command file.
01016
command
is the SCF command that you issued.
volname
is the name of the system disk volume that you specified in the command.
Cause. You issued a command that would stop the last path to the system disk.
Effect. The command is not executed. SCF waits for the next command.
Recovery. If you really want to stop the last path to the system disk, reissue the
command using the FORCED option.
STORAGE 001015 The STATS DISK, RESET command will reset the
counters used to compute the cache performance statistics on
volname.
STORAGE 01016 command rejected, the last path to volname
cannot be stopped!