SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-46
Storage Subsystem Error Messages
01017
command
is the SCF command that you issued.
processornum
is the processor number of the processor you specified in the command.
Cause. You issued a command to change processor ownership but the storage
subsystem manager process detected that it did not occur, even though no error was
returned from the disk process.
Effect. The processor ownership is unchanged. SCF waits for the next command.
Recovery. Check the EMS log for messages pertaining to the problem.
01018
command
is the SCF command that you issued.
Cause. You issued a command to make a path switch but the storage subsystem
manager process detected that it did not occur, even though no error was returned
from the disk process.
Effect. The path switch did not occur.
Recovery. Check the EMS log for messages pertaining to the problem.
01019
command
is the SCF command that you issued.
Cause. You tried to perform an operation on a $SYSTEM volume that is permitted
only on a demountable disk. $SYSTEM is not a demountable disk.
Effect. The command is not executed. SCF waits for the next command.
STORAGE 01017 command, processornum failed.
STORAGE 01018 command failed, reason unknown.
STORAGE 01019 command rejected, disk is not demountable.