SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Configuring and Managing the SMF Master Process
SCF Reference Manual for the Storage Subsystem—529937-008
4-4
Configuring the SMF Master Process
Configuring the SMF Master Process
Configuration tasks for the SMF master process include:
•
Adding the SMF Master Process on page 4-4
•
Altering the Values of the SMF Master Process Attributes on page 4-5
•
Deleting the SMF Master Process on page 4-6
Adding the SMF Master Process
The ADD MON Command (page 14-38) adds the SMF master process to the system
configuration database.
Considerations for ADD MON
Before adding an SMF master process to the system configuration, verify that:
•
The HP NonStop Transaction Management Facility (TMF) product is running.
•
The volume you plan to specify as the CATALOGLOCATION is in the STARTED
state and enabled in TMF.
•
The system disk is enabled in TMF if you do not specify a CATALOGLOCATION.
Example
1. Add the process to the system, specifying its catalog location:
-> ADD MON $ZSMS, SENDTO STORAGE, PRIMARYCPU 5, &
-> BACKUPCPU 4, CATALOGLOCATION $VIRCFG
2. Verify the SMF master process has been properly configured:
-> INFO MON $ZSMS
Example of Adding the SMF Master Process Using the
OBEYFORM Attribute
To configure the SMF master process for another system, create a command file by
using the OBEYFORM attribute of the INFO DISK command.
Mon I/O Process Information:
Library File shows the library file name of the SMF master process.
Program File shows the program file name of the SMF master process.