SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-57
Storage Subsystem Error Messages
01050
devname
is the name of the device you specified in the command.
Cause. You issued the CONTROL DISK, REPLACEBOOT command in noninteractive
mode. This command is available only in interactive mode. In interactive mode, you
are prompted to verify you want to replace the disk boot code on a disk that is
configured to be mirrored but is running nonmirrored.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Either:
•
Reissue the SCF command interactively.
•
Remove the command from the SCF command file.
01051
devname
is the name of the device you specified in the command.
Cause. The label is bad on the indicated disk. Either the time stamp or the last
mounted operating system (OS) field is null.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Either:
•
Revive the disk volume using the SCF START DISK command.
•
Use the SCF INITIALIZE DISK or ALTER DISK, LABEL command to write a new
label onto the disk, if required. Writing a new label deletes any existing files on the
disk.
01053
volname
is the name of the volume that you specified in the command.
STORAGE 01050 devname is currently running unmirrored.
REPLACEBOOT operation cannot be performed.
STORAGE 01051 The label is bad on disk device devname. The
label was not altered.
STORAGE 01053 The REPLACE DISK volname command is not
supported in non-interactive mode.