SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-008
B-74
Storage Subsystem Error Messages
09035
Cause. You attempted to delete a storage pool that is referenced by a disk profile.
Effect. The command is not executed. SCF waits for the next command.
Recovery.
1. Issue the INFO, PROFILE command to determine which disk profiles refer to the
storage pool.
2. Delete the disk profile that refers to the pool.
3. Retry the command.
09036
Cause. You attempted to add a SCSI device that has the same controller IDs on both
its primary and backup SAC.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Change either the primary SAC or the backup SAC so that they have
different controller IDs.
The SCSI Bus IDs of the SACs on a ServerNet/DA are always 6 or 7. The ID numbers
are assigned in a checkerboard fashion, so that these values will always be different:
•
The IDs of the same SAC number on two adjacent boards
•
The IDs of adjacent SAC numbers on the same board
STORAGE 09035 Can’t delete pool because a disk profile refers
to the pool.
STORAGE 09036 Invalid attribute values: Controller SCSI ids
are the same for both SACs.