SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Converting D-Series PUP and COUP Commands to
SCF Commands
SCF Reference Manual for the Storage Subsystem—529937-008
C-3
PUP Commands and Equivalent SCF Commands
ISOLATE ALTER DISK,
PHYSVOLSELECT
ON
The virtual disk process is allowed to put
files on the volume only when the request
contains the physical volume name.
FORMAT INITIALIZE DISK Erases existing files, labels the disk, and
starts it.
LABEL ALTER DISK, LABEL Erases existing files and writes a volume
label on a new or previously labeled
volume.
LISTBAD INFO DISK, BAD Displays bad sector information for the
specified disk.
LISTCACHE INFO DISK, CACHE Displays disk cache configuration
information for the specified disk.
LISTCACHE,
STATISTICS
STATS DISK Lists current statistics.
LISTCACHE, INIT STATS DISK, RESET Lists current statistics and restores
statistics counters to their initial values
after the statistics are displayed.
LISTDEV INFO
STATUS
Displays disk configuration and status
information for the specified disk.
STATUS Displays the current status of the object.
LISTDEV Displays the device type, that is, type 4
for tape.
LISTFREE -- Not applicable to the storage subsystem.
Use the DSAP utility.
LISTLABEL INFO DISK, LABEL Displays the volume label information for
the specified disk.
LISTLOG INFO DISK, LOG Displays spared sectors.
LOADMICROCODE -- Not applicable to the storage subsystem.
Not required.
LSATOFILE INFO DISK, SECTOR Displays the file name of that sector.
PRIMARY PRIMARY Switches the process backup processor
and primary processor.
SWITCH Specifies the preferred path for any
device accessed from multiple paths.
PSATOCYL -- Not applicable to the storage subsystem.
Not required.
QUARANTINE ALTER DISK,
AUTOSELECT OFF
Prevents the virtual disk process from
placing files on the volume.
REBUILDDFS CONTROL DISK,
REBUILDDFS
Rebuilds the free-space table on a
magnetic disk.
REDEFINEPOOL ALTER POOL Changes any specified attributes.
PUP Command SCF Command Comments (continued)