SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Index
SCF Reference Manual for the Storage Subsystem—529937-008
Index-5
E
DETAIL attribute
INFO command 14-80
STATUS command 14-118
VERSION command 14-140
Device states and substates
See States and substates, SCF
DEVICEID attribute
ADD TAPE command 14-44
ALTER TAPE command 14-66
CONTROL SAC command 14-73
DEVICEID attribute, REPLACE SAC
command 14-102
Disk cache, reconfiguring 6-23
Disk load balancing 8-1/8-18
Disk naming conventions, set by
NAMEMASK attribute 14-23
DISK object
ABORT command for 14-5
ADD command for 14-8
ALLOWOPENS command for 14-46
ALTER command for 14-48
CONTROL command for 14-69
DELETE command for 14-75
INFO command for 14-80
INITIALIZE command for 14-88
PRIMARY command for 14-92
RENAME command for 14-100
RESET command for 14-104
START command for 14-109
states and substates 2-5
STATS command for 14-114
STATUS command for 14-118
STOP command for 14-130
STOPOPENS command for 14-135
SWITCH command for 14-138
Disk path configuration 6-2
Disk path information 5-8
Disk types 6-2
DISKINTERVAL attribute
ADD POOL command 14-34
ALTER POOL command 14-55
Disks
See Magnetic disks
See Virtual Disks
DISKTHRESHOLD attribute
ADD POOL command 14-34
ALTER POOL command 14-55
Displaying configured information
See INFO command
Displaying current information
See STATUS command
Doubly allocated file extents,
correcting 7-17
DOWN command, PUP C-2
DOWN substate, defined 2-5
DOWN, HARD command, PUP C-2
E
EMS message
adapter configuration 11-22
disk becomes full 14-34
few extents left 14-34, 14-56
generated by checksum error 7-8
generated by sensitive command 14-4
EMU attribute, STATUS SAC
command 14-124
EMULIST attribute, STATUS SAC
command 14-124
Enclosure interleaving 6-12
cannot be used with
AUTOCONFIGURE attribute 6-6
mirrored disk placement with 6-2, 6-6,
6-8, 6-12, 12-2, 13-2
not supported for the system disk 6-5
Equivalent commands, SCF and
COUP C-6
Equivalent commands, SCF and PUP C-2