SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Index
SCF Reference Manual for the Storage Subsystem—529937-008
Index-18
T
Swapping processors
for disk 7-24/7-26
for Open SCSI device 12-12
for pool process 9-13
for SMF master process 4-8
for virtual disk 10-13
SWITCH ADAPTER command 11-23
SWITCH DISK command 14-138
changes active data path for disk 7-27
considerations for 7-27
SWITCH SCSI command
changes the active data path for an
Open SCSI device 12-11
System configuration database 1-2
System disk
alternate location 6-5
considerations for 6-5
do not use STOPOPENS command
on 7-22, 14-135
T
Tape drive
See also TAPE object
adding 13-9
altering 13-11
configuration information for 13-3/13-5
configuring and managing 13-1/13-15
deleting 13-12
enabling or disabling labeled-tape
processing 13-13
starting 13-14
status information for 13-5/13-8
stopping 13-15
TAPE object 2-12
ADD command for 14-42
ALTER command for 14-65
DELETE command for 14-79
INFO command for 14-87
object name 2-12
PRIMARY command for 14-96
Tape object (continued)
RESET command for 14-107
START command for 14-112
states and substates 2-12
STATUS command for 14-128
STOP command for 14-133
See also Tape drive 2-12
Tape path configuration 13-2
TEST substate, defined 2-5
Timeouts for commands 14-3
Topology branch
defined 8-1
G06.10 and earlier example 8-6
G06.11 and later example 8-3
support for enclosure interleaving 6-12
TRACEBUFLEN attribute
ADD SCSI command 14-42
ALTER SCSI command 14-62
TRACELEVEL attribute
ADD SCSI command 14-42
ALTER SCSI command 14-62
Troubleshooting
adapter installation 11-22
SCF states and substates 2-6
virtual disk, adding 10-9
TYPE attribute
ADD DISK command for virtual
disks 14-30
U
UNKNOWN-REASON substate,
defined 2-6
UP command, PUP C-4
UPDATESTATS attribute
ADD POOL command 14-36
ALTER POOL command 14-57
Upgrading a mirrored volume online D-2
UPS attribute
ALTER SUBSYS command 14-64