SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Displaying Information About Magnetic Disks
SCF Reference Manual for the Storage Subsystem—529937-008
5-5
Displaying Disk Configuration Information
Displaying Disk Configuration Information
-> INFO $SYSTEM, CONFIG
Disk Type Specific Information:
*AuditTrailBuffer/SQLMXBuffer (MB)..... 0
*AutoRevive............................ OFF
*AutoSelect............................ n/a
*AutoStart............................. ON
*CBPoolLen............................. 1000
*FSTCaching............................ OFF
*FullCheckpoints....................... ENABLED
*HaltOnError........................... 1
*LKIDLongPoolLen....................... 8
*LKTableSpaceLen....................... 15
*MaxLocksPerOCB........................ 5000
*MaxLocksPerTCB........................ 5000
*NonAuditedInsert...................... OFF
*NumDiskProcesses...................... 6
*NonAuditedInsert...................... OFF
*OSSCaching............................ ON
*PhysvolSelect......................... n/a
*Pool.................................. None
*ProtectDirectory...................... SERIAL
*ReviveBlocks.......................... 1
*ReviveInterval........................ 100
*RevivePriority........................ 0
*ReviveRate............................ 0
*SerialWrites.......................... ENABLED
Primary Path Information:
Adapter............................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50
Disk Device ID / Port Name............ 0
Disk Device LUN....................... 0
Location (Group,Module,Slot).......... (1,1,11)
SAC Name.............................. $ZZSTO.#PMF.SAC-2.GRP-1.MOD-1.SLOT-50
SAC Number............................ 2
Backup Path Information:
Adapter............................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
Disk Device ID / Port Name............ 0
Disk Device LUN....................... 0
Location (Group,Module,Slot).......... (1,1,11)
SAC Name.............................. $ZZSTO.#PMF.SAC-2.GRP-1.MOD-1.SLOT-55
SAC Number............................ 2
Mirror Path Information:
Adapter............................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
Disk Device ID / Port Name.............0
Disk Device LUN....................... 0
Location (Group,Module,Slot).......... (1,1,12)
SAC Name.............................. $ZZSTO.#PMF.SAC-1.GRP-1.MOD-1.SLOT-55
SAC Number............................ 1
Mirror Backup Path Information:
Adapter............................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50
Disk Device ID / Port Name............ 0
Disk Device LUN....................... 0
Location (Group,Module,Slot).......... (1,1,12)
SAC Name.............................. $ZZSTO.#PMF.SAC-1.GRP-1.MOD-1.SLOT-50
SAC Number............................ 1