SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Displaying Information About Magnetic Disks
SCF Reference Manual for the Storage Subsystem—529937-008
5-22
Examples of STATUS Reports for Magnetic Disks
Example 3: Displaying the Status of a Nonmirrored Disk
To display the status of the nonmirrored disk $DATA11:
-> STATUS $DATA11
The explanation of fields is the same as for Example 1: Displaying the Status of a
Mirrored Disk on page 5-21.
Explanation of Fields
LDev the logical device number for the disk volume. This number is
arbitrarily assigned to a device when you configure the device
and every time the system is loaded.
Path the disk path assignment.
Status shows whether the disk path is the current path (ACTIVE) or not
(INACTIVE).
State the current SCF state of the disk path. For an explanation, see
Table 2-1, Object States and Substates of Magnetic Disks, on
page 2-5.
Substate the current SCF substate of the disk path.
Primary PID
Backup PID
are the processor number and PIN of the primary and backup
disk processes.
STORAGE - Status DISK \COMM.$DATA11
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
210 *STARTED STARTED 9,262 8,271