SCF Reference Manual for the Storage Subsystem (G06.27+, H06.04+)

Contents
SCF Reference Manual for the Storage Subsystem—529937-008
vi
8. Disk Load Balancing (continued)
8. Disk Load Balancing (continued)
Topology Branch Example for G06.10 and Earlier RVUs 8-6
A Closer Look at Eight Disks 8-8
PRIMARY Command Function in G06.00 Through G06.10 8-8
PRIMARY Command Function in G05.00 and Earlier 8-11
Establishing a Disk Load Balance in RVUs Prior to G06.11 8-14
Maintaining a Disk Load Balance 8-18
9. Configuring and Managing Storage Pools for Magnetic Disks
Displaying Information About Storage Pools 9-2
Displaying Storage Pool Configuration Information 9-2
Displaying Storage Pool Status Information 9-5
Configuring a Storage Pool for Magnetic Disk Drives 9-6
Adding a Storage Pool 9-6
Adding a Magnetic Disk to a Storage Pool 9-8
Removing a Magnetic Disk From a Storage Pool 9-8
Altering Storage Pool Attribute Values 9-9
Deleting a Storage Pool 9-10
Managing a Storage Pool 9-12
Starting a Storage Pool 9-12
Stopping a Storage Pool 9-13
Resetting a Storage Pool 9-13
Swapping Processors for a Pool Process 9-13
10. Configuring and Managing Virtual Disks
Overview of Virtual Disks 10-2
How Virtual Disks Relate to Magnetic Disks
10-2
Functions of the Virtual Disk Process
10-2
Location-Independent Naming 10-2
Displaying Information 10-3
Displaying Configuration Information for Virtual Disks 10-3
Displaying Current Status Information 10-6
Configuring a Virtual Disk 10-7
Adding a Virtual Disk 10-7
Troubleshooting Problems With Adding a Virtual Disk 10-9
Altering Virtual Disk Attribute Values 10-10
Deleting a Virtual Disk 10-11