SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

3. Display the changed status:
-> STATUS DISK $D0201-*
STORAGE - Status DISK \WAGER.$D0201-*
LDev Path Status State Substate Primary Backup
PID PID
104 PRIMARY ACTIVE STARTED 3,35 2,107
104 BACKUP INACTIVE STARTED 3,35 2,107
104 MIRROR ACTIVE STARTED 3,35 2,107
104 MIRROR-BACKUP INACTIVE STARTED 3,35 2,107
Processor 3 now controls the primary disk process for $D0201, and processor 2 controls the
backup disk process.
Changing the Active Path for a Disk
The “SWITCH DISK Command” (page 295) designates the active path to a disk, determines whether
the -P or -B path is active and, if the disk is mirrored, whether the -M or -MB path is active.
You should configure the -P and -M paths to be active because they are on opposite ServerNet
fabrics.
112 Managing Disks