SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

STORAGE - Status DISK \WAGER.$D0207-*
LDev Path Status State Substate Primary Backup
PID PID
112 PRIMARY INACTIVE STARTED 2,118 3,237
112 BACKUP ACTIVE STARTED 2,118 3,237
STORAGE - Status DISK \WAGER.$D0208-*
LDev Path Status State Substate Primary Backup
PID PID
114 PRIMARY INACTIVE STARTED 2,122 3,86
114 BACKUP ACTIVE STARTED 2,122 3,86
9. Move the corresponding disk processes to the other processor to match the switched paths.
This PRIMARY command forces half the disk processes to run in processor 3:
-> PRIMARY ($D0203, $D0207, $D0208), 3
10. Display the changed status:
-> STATUS $D02*-*
STORAGE - Status DISK \WAGER.$D0201-*
LDev Path Status State Substate Primary Backup
PID PID
104 PRIMARY ACTIVE STARTED 2,107 3,35
104 BACKUP INACTIVE STARTED 2,107 3,35
104 MIRROR ACTIVE STARTED 2,107 3,35
104 MIRROR-BACKUP INACTIVE STARTED 2,107 3,35
STORAGE - Status DISK \WAGER.$D0203-*
LDev Path Status State Substate Primary Backup
PID PID
105 PRIMARY INACTIVE STARTED 3,16 2,22
105 BACKUP ACTIVE STARTED 3,16 2,22
105 MIRROR INACTIVE STARTED 3,16 2,22
105 MIRROR-BACKUP ACTIVE STARTED 3,16 2,22
STORAGE - Status DISK \WAGER.$D0205-*
LDev Path Status State Substate Primary Backup
PID PID
105 PRIMARY ACTIVE STARTED 2,112 3,45
105 BACKUP INACTIVE STARTED 2,112 3,45
105 MIRROR ACTIVE STARTED 2,112 3,45
105 MIRROR-BACKUP INACTIVE STARTED 2,112 3,45
STORAGE - Status DISK \WAGER.$D0207-*
LDev Path Status State Substate Primary Backup
PID PID
112 PRIMARY INACTIVE STARTED 3,237 2,118
112 BACKUP ACTIVE STARTED 3,237 2,118
STORAGE - Status DISK \WAGER.$D0208-*
LDev Path Status State Substate Primary Backup
PID PID
114 PRIMARY INACTIVE STARTED 3,86 2,122
114 BACKUP ACTIVE STARTED 3,86 2,122
This is the desired load-balancing scheme for RVUs prior to G06.11.
132 Disk Load Balancing