SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Example of an INFO POOL Report
-> INFO POOL $POOL3
STORAGE - Info POOL \COMM.$POOL3
*Audited CatalogLocation *Magnetic *Mirrored *Updatestats
ALLOWED $VIRCFG.POOL3CAT REQUIRED REQUIRED 1
Explanation of Fields — INFO POOL Report
Indicates an attribute whose value you can change by using the SCF ALTER POOL command.*
Shows whether audited volumes, protected by the TMF product, are allowed or required in
the storage pool.
Audited
The location of the catalog for the storage pool process.CatalogLocation
Shows whether physical or mirrored volumes are allowed or required in the storage pool.Physical Mirrored
The time interval, in minutes, during which the storage pool process should collect information
about the physical volumes in the storage pool.
Updatestats
Example of a Detailed INFO POOL Report
-> INFO POOL $POOL3, DETAIL
STORAGE - Detailed Info POOL \COMM.$POOL3
*Audited............................... ALLOWED
*BackupCPU............................. 7
CatalogLocation....................... $VIRCFG.POOL3CAT
*DiskInterval.......................... 2%
*DiskThreshold......................... 90%
*ExtentInterval........................-1
*ExtentThreshold.......................-1
*HighPIN............................... OFF
*Magnetic.............................. REQUIRED
*Mirrored.............................. REQUIRED
*Mode.................................. QUIET
Monitor............................... $ZSMS
*PrimaryCPU............................ 6
*Program............................... $SYSTEM.SYSTEM.OPP
*StartState............................ STARTED
*UpdateStats........................... 1
Configuration State................... Fully Defined
Physical Volumes:
$P3D03 $P3D02 $P3D01
Virtual Volumes:
$NSDOM1 $NODE $NMS $NE $MYSTIC $MOSS $MINE $MHSRL2 $MHSREL
$MEZRPT $LOGICJ $LOGICI $LOGICG $LOGICF $LOGICD $LOGICB $LOGICA $LIME
$LANX $LANO $LANN $LANM $LANL $LANF $LAND $ASAP $FOXGT
Many fields of the INFO POOL display different values if the SMF master process is not started
(Configuration State is SMF Master Process is Down).
Explanation of Fields — INFO POOL
Indicates an attribute whose value you can change by using the ALTER POOL command.*
Shows whether audited volumes (protected by the TMF product) are allowed or required in the
storage pool.
Audited
The backup processor in which the storage pool process should start its backup process.BackupCPU
The location of the catalog for the storage pool process.CatalogLocation
The interval percentage at which the disk processes associated with the physical volumes in the
storage pool process should generate additional disk-full EMS messages.
DiskInterval
Displaying Information About Storage Pools 135